Stran 1 od 1
Ang/SLO avtodeli - Updated: 23.2.06
Objavljeno: 09 Feb 2006, 08:06
Napisal/-a djsly
drive shaft = polos
track control arm = roka
ball joint = končnik
Wishbone = roka podvozja
dampers = amortizer ?
Updated: 23.2.06
Objavljeno: 09 Feb 2006, 08:16
Napisal/-a Valjo
polos=drive shaft
roka=track control arm
lp valjo
Objavljeno: 09 Feb 2006, 08:29
Napisal/-a djsly
ti si car
tenks
Objavljeno: 09 Feb 2006, 14:33
Napisal/-a djsly
A obstaja kje kak ang-nem-slo slovar za avtodele?
Kaj bi lahko blo: ball joints in pa wishbone (roka??)
--> try changing your ball joints , may aswell go for the wishbone kit as they include ball joints
Objavljeno: 09 Feb 2006, 16:20
Napisal/-a Rider
Ball joint naj bi končnik, kaj bi blo pa wishbone pa pojma nimam
Objavljeno: 09 Feb 2006, 17:03
Napisal/-a Charger
Wishbone je roka podvozja.
Objavljeno: 13 Feb 2006, 09:03
Napisal/-a djsly
Kaj pa če bi mal take izraze dal v kako special temo?
Lulika, k men se ne da skoz prečesavat slovarjev, forumov,...
Hvala.
Objavljeno: 28 Sep 2006, 12:31
Napisal/-a djsly
Cylinder Bore Size =
Piston Stroke Length =
Head Gasket Bore Diameter =
Compressed Head Gasket Thickness =
Combustion Chamber Volume In CCs =
Piston Dome Volume In CCs, Negative For Dished Pistons =
Enter Piston Deck Clearance, Negative If ABOVE Deck =
Objavljeno: 28 Sep 2006, 13:01
Napisal/-a mloncar
djsly napisal/-a:Cylinder Bore Size = premer cilindra
Piston Stroke Length = dolžina hoda bata
Compressed Head Gasket Thickness = debelina "skompresirane" dihtunge za glavo
Combustion Chamber Volume In CCs = prostornina izgorevalne komore v kubičnih centimetrih
Objavljeno: 28 Sep 2006, 13:09
Napisal/-a mondy
djsly napisal/-a:Cylinder Bore Size = notranji premer cilindra
Piston Stroke Length = hod bata
Head Gasket Bore Diameter = premer lukenj v tesnilu glave
Compressed Head Gasket Thickness = debelina tesnila glave po montaži glave
Combustion Chamber Volume In CCs = volumen izgorevalne komore
Piston Dome Volume In CCs, Negative For Dished Pistons = volumen materiala nad ploščato površimo bata ali pod (odvisno od oblike bata)
Enter Piston Deck Clearance, Negative If ABOVE Deck = oddaljenost bata od zgornje ploskve bloka pri TDC.
Objavljeno: 28 Sep 2006, 13:22
Napisal/-a djsly
faak ste hitri... Norci
Tenks.